The KAI says to calibrate your level to the canopy deck then measure the prop pitch. I did this and got it set to 71.4 as recommended.
Today after a test flight I was chasing down a slight vibration. I measured the prop pitch at 67.1 on both blades.
Then I remembered that I used to righ side of the canopy deck to set the blades, today I used the left side.
Measured the canopy deck sides and sure enough there is a 4 degree difference!
Don?t know what to make of this, just putting it out there. I?m thinking the important thing is that the blades are within .1 degree of each other and that ?71.4? is a relative thing ?
Today after a test flight I was chasing down a slight vibration. I measured the prop pitch at 67.1 on both blades.
Then I remembered that I used to righ side of the canopy deck to set the blades, today I used the left side.
Measured the canopy deck sides and sure enough there is a 4 degree difference!
Don?t know what to make of this, just putting it out there. I?m thinking the important thing is that the blades are within .1 degree of each other and that ?71.4? is a relative thing ?