BruceMe
Well Known Member
I'm converting my O-320-B2C hollow crank engine to CS. I had the shop do the crank side, but the flange has the wrong bushings.
The hub is a Hartzell HC-C2YL-1BF. "L" style flange.
I found the threads on Lycoming SI1098N. I "think" it has these on it now... (I'll pull one and mic later today)
72066-S
72067-S
72067-S
72067-S
72067-S
72067-S
I believe the C2YL hub wants...
72065-S
72063-S
72064-S
72063-S
72063-S
72064-S
If anyone out there has done this, I could use a cross check.
And where can I get them for something less than $200 a lug !?!?
Thanks!
The hub is a Hartzell HC-C2YL-1BF. "L" style flange.
I found the threads on Lycoming SI1098N. I "think" it has these on it now... (I'll pull one and mic later today)
72066-S
72067-S
72067-S
72067-S
72067-S
72067-S
I believe the C2YL hub wants...
72065-S
72063-S
72064-S
72063-S
72063-S
72064-S
If anyone out there has done this, I could use a cross check.
And where can I get them for something less than $200 a lug !?!?
Thanks!