Pneumatic Squeezer Overhaul

[tx_jayhawk]

I have a C style squeezer that isn't squeezing like it should and is probably in need of overhaul. I know Bob Avery used to do that, but I'm not sure if he still is or who else might be doing that.

Any suggestions?

Thanks,
Scott

 

[JonJay]

I’ve used Yardstore. They specialize in new, used, and surplus pneumatic aircraft tools and repairs.

 

[CZ79]

Atlantic Air Tool

 

[rongawer]

I have a C style squeezer that isn't squeezing like it should and is probably in need of overhaul. I know Bob Avery used to do that, but I'm not sure if he still is or who else might be doing that.

Any suggestions?

Thanks,
Scott

I recommend you doing the service yourself. They're pretty simple internally and generally just need the o-rings replaced. You might just pull it apart (take photos for reference as you disassemble it) and measure for replacement o-rings. My old Chicago pneumatics (made back when it was actually made in the US...) uses a harder durometer BUNA o-ring, but you can use Viton as well. Any simple hydraulic fluid will work; I use MIL-5606H, but jack fluid from Harbor Freight will do the job as well. If you have a newer unit, it might have teflon rings as well; both are available at various suppliers. Reassemble with silicone grease and you should find it's working much like new.

 

[Doc356]

I’ve used Yardstore. They specialize in new, used, and surplus pneumatic aircraft tools and repairs.

I also used the Yardstore. Quick turnaround.