As I’m fabricating/installing a plenum, I’m learning how much I don’t know about composites. Anyway, even though the static P is inches of water, there’s still a lot of area. Trying not to make the fiberglass part too thick, I added a center support; idea taken from Mooney. In that application, the top of the Mooney aluminum doghouse is attached to the side baffles with #6 sheet metal screws and tinnerman nuts so guessing the center support is pretty essential there.
Might be overkill but idea submitted for others to reference as required. Enjoy
Might be overkill but idea submitted for others to reference as required. Enjoy
Attachments
Last edited: