Pitot/Static help

[YME]

Installing the Pitot/Static system in Tailcone (RV-12iS). The 8 x 11 sheet of paper of instructions/drawing for installing the Static Air System with the kit states, "below drawing is for RV-6. See DRW 28 for 7, & 9. For RV-8 see DRW 41 or DRW 85 for the pre-punched kit". Does any have a drawing depicting or referencing dimensions where to drill for the R/L static ports? I looked and could not find anything on Van's website.
Thanks, Tom

 

[FlyingDiver]

I think the locations are pre-punched. See 10iS/U-09.

 

[Brantel]

Yep, there should be a pre punched hole in the correct location.

 

[YME]

I think the locations are pre-punched. See 10iS/U-09.

You are correct just saw it.

 

[YME]

Yep, there should be a pre punched hole in the correct location.

Thanks guys it right there. Thought it was another rivet hole.