Page 49-02 Hose Length

[Paris12Man]

Hello All,
Page 49-02 step 1 calls for cutting the EA Hose H151 into two pieces per dimensions in figure 1. I've attached a picture of page 49-02 and I just want to make sure of the lengths to cut the hose. One length is 30 inches, and the other is 20 inches..... is that correct? A couple of inch marks (") next to the 30 FF-1208A and 20 FF-1208B would have remove any question. Thanks.

 

[BigJohn]

Steve,

Yes, a little " after the 20 and 30 would help here. I remember looking at this for a while myself to be sure what the plans meant. I also recall a bit of confusion about the spring that goes inside the hoses. Before you cut the spring make sure you have determined what length you will need for each hose, allowing for the one inch gap at the ends to alllow for the clamps.

John

 

[Paris12Man]

Thank you

Thank you John. I find it best to ask once, measure twice and cut once. Thanks for all the info. Steve