tkatc
Well Known Member
As I was dimpling the bottom rib of the rudder, I wondered how some builders could POSSIBLY make the figure 8 mistake. I thought it could never happen to me.... well, it didn't, but I came very close. I made a lightening hole!!
I flattened the dimple with the rivet gun and it looks pretty good. I am inclined to press on but wanted to run it by the masses. The original hole remains intact and not affected. Even the edge distance is borderline acceptable.
I flattened the dimple with the rivet gun and it looks pretty good. I am inclined to press on but wanted to run it by the masses. The original hole remains intact and not affected. Even the edge distance is borderline acceptable.