The Lycoming manual for my AEIO 360 only lists maxim, minimum and target values for oil temp and pressure. Under the pressure relief adjustment section it only says ?warm up engine, run at 2000rpm and if the pressure is out of limits make an adjustment?. It does not define how warm the oil should be (should I use 185F?).
I am trying to establish the impact of oil temp on the pressure. For example if the oil temp is 206F, would it be ?normal? and acceptable to see a pressure of ~58psi at ~2350 rpm at that temp?
Thx
I am trying to establish the impact of oil temp on the pressure. For example if the oil temp is 206F, would it be ?normal? and acceptable to see a pressure of ~58psi at ~2350 rpm at that temp?
Thx