BillL
Well Known Member
There was a recent thread on torquing filters and several comments on not having an adapter to reach the available swing space for the torque wrench. Here is a DIY wrench. A socket was split and welded to a bent bar. It allows easy torquing, if one is interested.
Pay attention to the clocking of the 1/2" drive to allow 90 deg orientation for a beam type wrench.
Note it is not one of the "I made from PVC" types.
Closing thread - see https://vansairforce.net/community/showpost.php?p=1461043&postcount=2
Pay attention to the clocking of the 1/2" drive to allow 90 deg orientation for a beam type wrench.
Note it is not one of the "I made from PVC" types.
Closing thread - see https://vansairforce.net/community/showpost.php?p=1461043&postcount=2
Last edited: