Airparkguy
I'm New Here
Hello Forum,
I have a Navaid and it appears as though the servo unit is defective. I am a electronic tech and I have tested the head control unit and all is ok, but the servo is erratic. I have changed all the solid state chips and it still is not functioning properly. I also was able to connect my control head to a system in a RV8 and it works as good as the one that was in the plane, so I have confirmed there must be some other components in my servo that is the problem. Does anybody have a schematic of the servo? Or can I purchase a servo that will work with the AP1 control head?
Thanks
Earl
I have a Navaid and it appears as though the servo unit is defective. I am a electronic tech and I have tested the head control unit and all is ok, but the servo is erratic. I have changed all the solid state chips and it still is not functioning properly. I also was able to connect my control head to a system in a RV8 and it works as good as the one that was in the plane, so I have confirmed there must be some other components in my servo that is the problem. Does anybody have a schematic of the servo? Or can I purchase a servo that will work with the AP1 control head?
Thanks
Earl