bkc3921
Well Known Member
I have a Teledyne/Mattituck TMX IO-360 in my 7A, and need a new oil drain tube for the #4 Cylinder (The baffle closure wire almost ate through it by vibration...even wrapped in the plastic tubing....might want to check those..be careful!)
I've looked through my paperwork, and cannot find how this clone is numbered compared to the original Lycoming (i.e Is it an A1A,A1B, etc)...and I am by far NOT an engine expert.
In order to get the exact right part number, I need to be sure of exact "model" of this clone....It's not listed on the data plate either....
I believe the part number may end up being the "73027"..but would like to be sure.
Anyone out there have one that could offer any advice...?
I've looked through my paperwork, and cannot find how this clone is numbered compared to the original Lycoming (i.e Is it an A1A,A1B, etc)...and I am by far NOT an engine expert.
In order to get the exact right part number, I need to be sure of exact "model" of this clone....It's not listed on the data plate either....
I believe the part number may end up being the "73027"..but would like to be sure.
Anyone out there have one that could offer any advice...?
Last edited: