I have been working on bending the fuel line that goes from the fuel filter through the landing gear tower and to the fuel pump and need help. It seems about impossible. It is a carbureted system. My aft bulkhead had one hole and I drilled another one per the plans for an aft battery cable route. Then realized the part, f-802 b-l-1 had been updated and the plan had the old part. The hole I drilled for the cable lines up better for the fuel line but I still am having a hard time getting the line to come out right. Does anyone have any pictures or suggestions?
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
Making fuel line from filter to pump-carbureted
- Thread starter BrianG123
- Start date
Brian---its can be a real Pain to route a rigid tube then try to flare the tube while laying on your back or side! We enlarge the holes and use hose.
