dhall_polo
Well Known Member
Looking for information/support on LSE inputs for engine monitoring.
The Plasma II w/Direct Crank has some outputs for tach and mp. Are these supported directly by AF3500/EIS? Any input on using these versus stock AFS rpm and mp sensors?
From the LS website:
RPM Output
Included in the options of the PLASMA II PLUS is a built in analog tachometer output. This provides RPM information for a mV meter. 0.3 volts represent 3,000 RPM, .0 v = 0 RPM.*
Absolute Manifold Pressure Output
The manifold pressure display option uses the calibrated and temp compensated manifold pressure information of the PLASMA CDI and allows it to be displayed on a digital mV meter.*
The Plasma II w/Direct Crank has some outputs for tach and mp. Are these supported directly by AF3500/EIS? Any input on using these versus stock AFS rpm and mp sensors?
From the LS website:
RPM Output
Included in the options of the PLASMA II PLUS is a built in analog tachometer output. This provides RPM information for a mV meter. 0.3 volts represent 3,000 RPM, .0 v = 0 RPM.*
Absolute Manifold Pressure Output
The manifold pressure display option uses the calibrated and temp compensated manifold pressure information of the PLASMA CDI and allows it to be displayed on a digital mV meter.*