Thanks, I"ve been researching reducers and safe for plexi cleaners. I found several post of using the PPG 860 and 870 for smoothing the filet on the windows, but I'll do a test just to make sure. From Van's documents, Isopropyl alcohol and mineral spirits are save around the windows as well. Heck with all the Acetone and MEK I have in the garage, even without it being used near the windows, still nervous having it in the same room with them.
Thanks for the info.
Lynn
Quote from Van's Document:
Cleaning And Use Of Liquids
For general cleaning use Dawn dishwashing liquid or equivalent and water followed by a clear
water rinse. To prevent water spots, blow dry with compressed air or wipe dry with soft cotton
flannel. Plexus, Sprayaway #848 Industrial Plastic Cleaner, or All Clear can also be used for day
to day cleaning. Grease, oil, tape residue, etc. may best be removed with Mineral spirits, refined
kerosene, white gasoline, naphtha, or isopropyl alcohol. Wash approved solvents off of canopy
with Dawn dishwashing liquid and water. It is best to avoid using products that are not specifically
formulated for acrylics on your canopy such as Rain-X or Lemon Pledge.