Hello, Hoping anyone can give me some guidance. Jeff's Bordelion's email address doesn't work and his web site is gone. He was the original person offering these LED nav lights as a package.
I am trying to figure out if these LED nav lights are no longer made because of the problem I have had with them from the start. Completed my RV10 in 2012. The lights work beautifully, problem is you can't have your VHF on. If the lights are turned on, initially there is no problem, but the minute SOMEONE broadcasts on your radio frequency, static comes on and will not go away, even after the broadcast is finished. That is with my panel mounted radio and belly mounted whip antenna.
I have tried using my handheld which is also hardwired into the aircraft power supply, but with a different wingtip antenna and the same thing happens. On this setup the wingtip antenna is right next to the Power Puck and the static begins even before someone broadcasts on frequency. Thus it is not my intercom.
I have not tried the handheld running from its own battery with its wingtip antenna. I suspect it is the power pucks that power the LED lights are emitting lots of RF which I have not been able to shield.
Does anyone have any information?
Thanks,
John
[email protected]
contact offline too at the above email...THANKS