LettersFromFlyoverCountry
Well Known Member
Question. Van's says if you don't have a -- I think it was -- .311 size drill, to drill the mount to gear leg hole, to use a 5/16". How many of you have done that and is there any significant safety penalty to pay there? I assume a .311 hole will be a snug fit for the bolt (as snug as the bolts through the 704 and wings and munt?) but a 5/16" will not.
And if you used the .311 size drill bit, where'd you get it?
And if you used the .311 size drill bit, where'd you get it?