Fitting the wheel pants on my RV4 with Desser 500x5 retreads. Full disclosure, Sam has been helpfull in a couple phone cons and nothing negative here.
The outboard + for the axle bolt was too high on the front glass half. It must be lower for tire clearance on the fairing. The .125 brackets ( pattern in instructions ) did not work for me so I made customs from .063 similar to Vans. Hope this saves someone grief![Smiling face with smiling eyes :blush: 😊](https://cdn.jsdelivr.net/joypixels/assets/7.0/png/unicode/64/1f60a.png)
The outboard + for the axle bolt was too high on the front glass half. It must be lower for tire clearance on the fairing. The .125 brackets ( pattern in instructions ) did not work for me so I made customs from .063 similar to Vans. Hope this saves someone grief
![Smiling face with smiling eyes :blush: 😊](https://cdn.jsdelivr.net/joypixels/assets/7.0/png/unicode/64/1f60a.png)