J-channel pics, please

[md9680]

Would someone please post pics of the upper and lower J-channels in their final positions on rear wing spar and as referenced in Sections 16 and 20? This will help me visualize the instructions in Section 13-02, step 5. Thank you.

 

[ryane67]

I think this is what you're looking for.... rolling them from one side to the other... minus my screw-up..

https://www.youtube.com/watch?v=Fei-uk59-tU

edit: the positioning in the video is correct for properly completing step 5, just be sure you don't drill one(or three) too many holes like I did.

 

[squeakersc063]

Would someone please post pics of the upper and lower J-channels in their final positions on rear wing spar and as referenced in Sections 16 and 20? This will help me visualize the instructions in Section 13-02, step 5. Thank you.

https://www.dropbox.com/sh/xu5p6f4l...?dl=0&preview=RV-14+Wing+13-01+THRU+24-04.pdf

PDF page 32 has a good photo on 16-04

 

[squeakersc063]

Also, here is how I did section 13 https://eaabuilderslog.org/?blprojentry&proj=7meNUQnN4&e=7yQhkHxZx&listcat=&sid=

 

[md9680]

I think this is what you're looking for.... rolling them from one side to the other... minus my screw-up..

https://www.youtube.com/watch?v=Fei-uk59-tU

edit: the positioning in the video is correct for properly completing step 5, just be sure you don't drill one(or three) too many holes like I did.

Oh, yes! This is very helpful. Thank you.

 

[md9680]

https://www.dropbox.com/sh/xu5p6f4l...?dl=0&preview=RV-14+Wing+13-01+THRU+24-04.pdf

PDF page 32 has a good photo on 16-04

Yeah, that pic says a lot. Thanks.

 

[md9680]

Also, here is how I did section 13 https://eaabuilderslog.org/?blprojentry&proj=7meNUQnN4&e=7yQhkHxZx&listcat=&sid=

Thanks. Looks a lot like how I'm doing it so I must not be crazy!

 

[HAL Pilot]

i would say most folks not involved with EAA would say we are all crazy.