I'm working an RV-10 but I suspect it's the same for any RV cowling. I want to ensure this looks correct before committing to any drilling.
The diameter both horizontally and vertically is roughly 13" ... hard to be exact without a straight edge. I do have a bit of a gap to accommodate the later painting and whatnot. The top still protrudes out a bit further than the bottom. I can probably sand a bit more on the inside of the top to get it tighter. Thoughts?
The diameter both horizontally and vertically is roughly 13" ... hard to be exact without a straight edge. I do have a bit of a gap to accommodate the later painting and whatnot. The top still protrudes out a bit further than the bottom. I can probably sand a bit more on the inside of the top to get it tighter. Thoughts?