HS 1016 Web Stiffener MUCH ADO ABOUT NOTHING
ACE, thank's for the response. I decided to reach in and simply squeeze the parts to see if they were going to reach. The fell into place perfectly.
Never mind.........DOH!
.................................................................................
Help guys, or I'm going to lose an entire weekend work day. Even if I lose the day, I still need some help.
RV-10, HS 1016 Web Stiffener, Page 8-9, Step 3 (Plan Date 9/17/03)
When I cleco in the web stiffener (HS 1016) that fits between the two inspar ribs, it seems like it is too short. There seems to be about 1/4 inch gap on each end. When I look ahead and see that I'm supposed to rivet those to the inspar ribs, there's no way its going to work with that 1/4 gap on either end. Everything else in the entrie HS fits perfectly, and yes, I have the inspar ribs turned the right way, and as far as I can tell, the stiffener is installed correctly under the stringers.
I can't seem to get the **** picture posted so you can see what I'm talking about, so I'm trying to be as descriptive as possible.
ACE, thank's for the response. I decided to reach in and simply squeeze the parts to see if they were going to reach. The fell into place perfectly.
Never mind.........DOH!
.................................................................................
Help guys, or I'm going to lose an entire weekend work day. Even if I lose the day, I still need some help.
RV-10, HS 1016 Web Stiffener, Page 8-9, Step 3 (Plan Date 9/17/03)
When I cleco in the web stiffener (HS 1016) that fits between the two inspar ribs, it seems like it is too short. There seems to be about 1/4 inch gap on each end. When I look ahead and see that I'm supposed to rivet those to the inspar ribs, there's no way its going to work with that 1/4 gap on either end. Everything else in the entrie HS fits perfectly, and yes, I have the inspar ribs turned the right way, and as far as I can tell, the stiffener is installed correctly under the stringers.
I can't seem to get the **** picture posted so you can see what I'm talking about, so I'm trying to be as descriptive as possible.
Last edited: