terry.mortimore
Well Known Member
Hi gang: Forgive the none RV post, but I was hoping to tap into the lycoming brain trust here.
I’m trying to use a horizontal oil sump #77159 on my IO-320 powered Osprey 2 and I’m trying to find intake tubes that will work for me rather than fabricating them.
I was told that the oil sump was used on O-360A4K (Twin Comanche) as well as others. My engine is a 320 narrow deck.
The one tube shown in the picture is close for number 1 and 2 cylinders, but as you can see in the picture is a little short on 3 and 4 cylinders.
Can anyone point me in the right direction?
Thanks Terry
I’m trying to use a horizontal oil sump #77159 on my IO-320 powered Osprey 2 and I’m trying to find intake tubes that will work for me rather than fabricating them.
I was told that the oil sump was used on O-360A4K (Twin Comanche) as well as others. My engine is a 320 narrow deck.
The one tube shown in the picture is close for number 1 and 2 cylinders, but as you can see in the picture is a little short on 3 and 4 cylinders.
Can anyone point me in the right direction?
Thanks Terry