bill.hutchison
Well Known Member
I'm waist deep in my first CI as an owner, working with my local mech and following the most excellent guide that Walt from EXP put together.
I have an RV6A with Cleveland brakes.
Determined today that both of these assemblies - which I'm referring to as Brake Guides (because I don't know the proper name) are cracked where the bolt goes through the axle. Started looking at this closely when we noticed excessive play in the bracket and realized they were both cracked.
I'm not 100% sure but looking at the diagram on ACS, I *think* it's the torque plate but I could be way off. The drawing looks similar to but not quite what I have (500x5 clevelands) in hand.
I emailed Vans and they said it was a Cleveland part and not something they supplied, so I'm just trying to figure out what part this is.
Thank you, in advance.
I have an RV6A with Cleveland brakes.
Determined today that both of these assemblies - which I'm referring to as Brake Guides (because I don't know the proper name) are cracked where the bolt goes through the axle. Started looking at this closely when we noticed excessive play in the bracket and realized they were both cracked.
I'm not 100% sure but looking at the diagram on ACS, I *think* it's the torque plate but I could be way off. The drawing looks similar to but not quite what I have (500x5 clevelands) in hand.
I emailed Vans and they said it was a Cleveland part and not something they supplied, so I'm just trying to figure out what part this is.
Thank you, in advance.
Attachments
Last edited: