Garmin GSA 28 Pitch Autopilot Servo Installation Drawing RV8

[ten4teg]

Can someone let me know what drawing I need for the subject mounting installation? Appreciate it. Thanks

 

[Walt]

It's in the G3X install manual.

 

[ten4teg]

It's in the G3X install manual.

Hi Walt, I don't see it in the G3X Install Manual. Is there another option?

 

[mburch]

In the current G3X installation manual (revision AZ) the GSA 28 pitch servo installation for the RV-8 is detailed in figure 16-10.1.

 

[Walt]

Hi Walt, I don't see it in the G3X Install Manual. Is there another option?

Yes, get someone to read the manual for you?

 

[inktomi]

It starts on page 191 of the G3X Touch Installation Manual.

https://static.garmin.com/pumac/190-01115-01_az.pdf

 

[Dad's RV-10]

Hi Walt, I don't see it in the G3X Install Manual. Is there another option?

Yes, get someone to read the manual for you?

It starts on page 191 of the G3X Touch Installation Manual.

https://static.garmin.com/pumac/190-01115-01_az.pdf

It seems many don't know how to perform a simple search within a document. In Windows, Ctrl + F will open a search window.

The search term "RV-8" is found a total of six times in the entire G3X installation manual. Four of those six mentions are on Page 191.

Every platform has an equally simple method to search.

 

[chrispratt]

Can someone let me know what drawing I need for the subject mounting installation? Appreciate it. Thanks

If you have a G5 Installation manual, look in Section E, Pages E-28 thru E-31 for Pitch Mounting diagrams. If you don't have the manual you can download it from the Garmin site, or contact [email protected].

Chris

 

[ten4teg]

If you have a G5 Installation manual, look in Section E, Pages E-28 thru E-31 for Pitch Mounting diagrams. If you don't have the manual you can download it from the Garmin site, or contact [email protected].

Chris

Thanks, someone sent me the drawing. The one I had did not have this info. Must have been an earlier version. Tom