G3X Touch Aileron Trim Display

[SeanB]

Hi,
I’ve now conducted a few flights in Phase I and have a few bugs to resolve. One, is the aileron trim indication on the PFD being backward. I am also using a VPX Pro. The physical movement of the aileron trim is correct when using the hat switch and correct when using Autopilot. But, the aileron trim indicator on the PFD is slightly off center and backward. Inverting this on the VPX literally flips movement (polarity), so no good. Is there a configuration in G3X to resolve this issue? BTW, behavior and indicators for pitch trim and flaps are correct.

Thanks!

 

[Avanza]

Do you have the latest G3X software ?
If memory serves me right I recall that there were an issue with the VPX going backwards. This was resolved with later a Garmin update.

Good luck

 

[SeanB]

Thanks for your reply. Yes, I do have the current G3X Touch software. Will go into LRU config mode and have a look.

 

[fl-mike]

Just recalibrate the sensor input.

 

[SeanB]

Thanks, Mike! This is helpful info.