Folks
I have a G3X non touch hooked up to a GTX 23ES and GNS430W. Recently I updated to the latest G3X firmware (v12.1) only to find that TIS B traffic surveillance had failed. This was indicated as an alarm in the 430 message window. Downgrading to v12.0 restored normal operation but at the expense of not realizing the benefit of upgrades to all affected LRUs including the G5
I have not had any written feedback or commitment from Garmin on either acknowledgement of the issue, reproduction, or areas of the ARINC system that were updated in the recent release.
It would be useful to have more than one data point on this in order to motivate a response from Garmin. If anybody has had a similar experience as mine (or not) with the same configuration I would appreciate it if you would let me know and I will bring it to their attention so that a fix can be incorporated in the next update, whenever that is.
Thanks in advance
Tom Gardiner
Lancair 360 (sorry!). RVs are great!
I have a G3X non touch hooked up to a GTX 23ES and GNS430W. Recently I updated to the latest G3X firmware (v12.1) only to find that TIS B traffic surveillance had failed. This was indicated as an alarm in the 430 message window. Downgrading to v12.0 restored normal operation but at the expense of not realizing the benefit of upgrades to all affected LRUs including the G5
I have not had any written feedback or commitment from Garmin on either acknowledgement of the issue, reproduction, or areas of the ARINC system that were updated in the recent release.
It would be useful to have more than one data point on this in order to motivate a response from Garmin. If anybody has had a similar experience as mine (or not) with the same configuration I would appreciate it if you would let me know and I will bring it to their attention so that a fix can be incorporated in the next update, whenever that is.
Thanks in advance
Tom Gardiner
Lancair 360 (sorry!). RVs are great!