tomhanaway
Well Known Member
I posted this directly to Steve (g3x)but realized he's pretty busy with sun and fun. Also, limited internet on site
As you can see from the pictures, the display is scaling backwards up to 0. Configuration is set to 0 to 55 amps. Switching the amp meter shunt leads makes no difference.
So basically I get no amp reading when the engine is on. All other gauge displays seem to be working fine.
Any suggestion?
Thanks,
Tom Hanaway
As you can see from the pictures, the display is scaling backwards up to 0. Configuration is set to 0 to 55 amps. Switching the amp meter shunt leads makes no difference.
So basically I get no amp reading when the engine is on. All other gauge displays seem to be working fine.
Any suggestion?
Thanks,
Tom Hanaway