mill2978
Well Known Member
I just got the tanks clecoed together and put them on the wing. The alignment of the Z bracket(T-712) to the tank baffle is off. With the tank on the wing I marked the holes through the tank on the Z bracket and pulled off the tank to look.
The spacing from the hole(future) to the edge of the Z bracket is only .228 from the edge.
I removed the T-702 tank baffle and placed it back on the Z brackets using the markings for alignment. I can see the center line I drew on the rest of the Z brackets. The misalignment is on both wings and only on the Z brackets nearest the wing root.
Is this a problem? Should I order two new T-712's or build on?
Thanks
Aaron
The spacing from the hole(future) to the edge of the Z bracket is only .228 from the edge.
I removed the T-702 tank baffle and placed it back on the Z brackets using the markings for alignment. I can see the center line I drew on the rest of the Z brackets. The misalignment is on both wings and only on the Z brackets nearest the wing root.
Is this a problem? Should I order two new T-712's or build on?
Thanks
Aaron