JonJay
Well Known Member
I have the standard 385 Stewart Warner resistive sensors. I have an intermittent problem with the left hand sensor occasionaly shorting, or going open. Sometimes it is rock solid, sometimes it goes away. Very intermittent.
It has been difficult to repeat the problem with an ohm meter but I was able to catch it a couple times. It does not seem to matter what postion, empty or full.
Has anyone seen this failure mode with that sender?
I have ordered a new sender and 1 oz. of proseal to change it out but was curious if others have seen this before.
It has been difficult to repeat the problem with an ohm meter but I was able to catch it a couple times. It does not seem to matter what postion, empty or full.
Has anyone seen this failure mode with that sender?
I have ordered a new sender and 1 oz. of proseal to change it out but was curious if others have seen this before.