Hi Cyber Friends!!!
I am trying to dial in the EGT LOP curves and could someone PLEASE provide a recommendation on the restrictor sizes?
First question is...If you are leaning the mixture and all of the EGTs are rising and then one cylinder EGT peaks at a higher GPH than the others does that mean that the cylinder is leaner or richer than the others? I am thinking that it is leaner because it did not have enough fuel fuel supply and it leaned out sooner as a result.
The second question is what size fuel restrictor do you recommend going with to balance out the LOP EGT curves?
All cylinders currently have 0.0280 restrictors. Here are 4 LOP sweeps.
#2 18.9
#4 18.4
#5 17.8
#1 17.6
#6 17.5
#3 17.4
#2 14.6
#4 14.6
#3 12.4
#5 12.4
#6 12.4
#1 12.2
#4 15.5
#2 15.2
#3 14.2
#5 14.2
#6 14.2
#1 14.2
#4 15.0
#2 14.6
#3 14.0
#5 14.0
#6 13.8
#1 13.7
THANKS!!!
I am trying to dial in the EGT LOP curves and could someone PLEASE provide a recommendation on the restrictor sizes?
First question is...If you are leaning the mixture and all of the EGTs are rising and then one cylinder EGT peaks at a higher GPH than the others does that mean that the cylinder is leaner or richer than the others? I am thinking that it is leaner because it did not have enough fuel fuel supply and it leaned out sooner as a result.
The second question is what size fuel restrictor do you recommend going with to balance out the LOP EGT curves?
All cylinders currently have 0.0280 restrictors. Here are 4 LOP sweeps.
#2 18.9
#4 18.4
#5 17.8
#1 17.6
#6 17.5
#3 17.4
#2 14.6
#4 14.6
#3 12.4
#5 12.4
#6 12.4
#1 12.2
#4 15.5
#2 15.2
#3 14.2
#5 14.2
#6 14.2
#1 14.2
#4 15.0
#2 14.6
#3 14.0
#5 14.0
#6 13.8
#1 13.7
THANKS!!!