Bluelabel
Well Known Member
I know there have been threads on this, I've read them all, but I can't find any real good answers. (Btw, first time builder, so you may have to fill in some of the blanks)
About to be building the tanks, and I'm looking for the best option for the fuel level sender to go to the EFIS (prob going with AFS). When I say best, I mean accurate (as can be based on the shape we're dealing with) and reliable.
I know there are many options, but would like to hear from some people as far as what they are using, have used, and how they like them.
I've heard about the Cap plates from Vans. (Heard both good and bad things, also heard Vans themselves don't recommend), but can't find them in the catalog.
I've heard about converting the floats to cap via a Dynon adapter.
I've heard about using a system from Princeton Electronics, but not exactly sure how it physically goes into the tank and if it works as predicted.
Any input would be great, esp with pictures. Also, actual part or model numbers where applicable if you have them.
Thanks in advance....
About to be building the tanks, and I'm looking for the best option for the fuel level sender to go to the EFIS (prob going with AFS). When I say best, I mean accurate (as can be based on the shape we're dealing with) and reliable.
I know there are many options, but would like to hear from some people as far as what they are using, have used, and how they like them.
I've heard about the Cap plates from Vans. (Heard both good and bad things, also heard Vans themselves don't recommend), but can't find them in the catalog.
I've heard about converting the floats to cap via a Dynon adapter.
I've heard about using a system from Princeton Electronics, but not exactly sure how it physically goes into the tank and if it works as predicted.
Any input would be great, esp with pictures. Also, actual part or model numbers where applicable if you have them.
Thanks in advance....