I have an IO 360 with the Bendix horizontal FI, but I am not getting enough fuel flow to get 100% power. Here's the symptoms:
Uneven fuel from the injectores, using the bottle test. Did this several times and fuel rates from the injectors is different each time. We noticed bubbles coming out of the injectors when they got submerged in the fuel.
50 GPH at the servo intake. The large fuel line.
5 to 7 GPH coming out of the servo with bubbles in it when submerged in the fuel. The smaller fuel line that goes to the fuel flow divider.
I can only figure that there is a problem with the servo itself, but don't know enough about servos/FI systems to know for sure. My current plan is to call the supplier and ask if it needs to be replaced.
Any ideas or advice?
Thanks in advance.
Uneven fuel from the injectores, using the bottle test. Did this several times and fuel rates from the injectors is different each time. We noticed bubbles coming out of the injectors when they got submerged in the fuel.
50 GPH at the servo intake. The large fuel line.
5 to 7 GPH coming out of the servo with bubbles in it when submerged in the fuel. The smaller fuel line that goes to the fuel flow divider.
I can only figure that there is a problem with the servo itself, but don't know enough about servos/FI systems to know for sure. My current plan is to call the supplier and ask if it needs to be replaced.
Any ideas or advice?
Thanks in advance.