ES-00079 floating connector crimper?

[JwWright57]

hi all - i'm at the point where i'm working on the wing connectors and need to crimp the ES-00079 floating connector. What the heck do I do that with? A google search came up with zilch....

 

[fl-mike]

Have a real part number and manufacturer, or a photo?

 

[Bob Y]

Working on my wing kit now and will be terminating those within the next week or so. I intend to use this:

https://www.showmecables.com/d-sub-crimp-tool

It's what I used to terminate the MOLEX pins for the trim servo connector too - they were just a lot smaller.

 

[MMiller]

All the info you will ever need on the Amp contacts used in these floating connectors;

https://drive.google.com/open?id=0ByPxADyU-DwPUUNZZzA2aFByYlE

Van’s suggestion for a crimping tool can be found on page 24 of section 5;

http://www.vansaircraft.com/pdf/revisions/RV-ALL_05.pdf

 

[JwWright57]

wow MMiller that is some crazy detailed information! Thanks a ton.

 

[rongawer]

Excellent crimpers

Here?s the crimpers I?ve used for everything molex, even the straight-from-china Hilitchi molex-copies. It?s a low priced, very accurate tool that ratchets nicely. IWISS makes good stuff.

IWISS Crimping Tools for Dupont Professional Pin Compression Ratcheting Modular Insulated Terminal Crimper Pin 2.54mm 3.96mm 28-18AWG 0.5-1.0mm2 with Wire-electrode Cutting Die https://www.amazon.com/dp/B00OMM4YUY/ref=cm_sw_r_cp_tai_CWbpBb5KQZ24E