Finally epoxied the rudder trailing edge, a job I've been dreading since I bought the kit. Wish I felt better about it. She's good and straight cleco'd in place to the angle, but I hope I just didn't epoxy all my cleco's and the angle to the rudder! I boelubed the surface of the angle and each cleco, plus cleaned out each hole and any excess epoxy I could see, but man I've got a bad feeling about this!
Anybody else have a problem with this when everything set up? Also, how did you clean the hardened epoxy off the rudder? I assume a deburring tool will clean out the holes if needed. Never thought I'd feel more comfortable riveting than gluing, but I can drill out a bad rivet.
Guess I just don't like having to let things set 24 to 36 hours before I can see what I've got!
Anybody else have a problem with this when everything set up? Also, how did you clean the hardened epoxy off the rudder? I assume a deburring tool will clean out the holes if needed. Never thought I'd feel more comfortable riveting than gluing, but I can drill out a bad rivet.
Guess I just don't like having to let things set 24 to 36 hours before I can see what I've got!