Hey Guys,
Im diving into the front spar of my Empennage. Attached is a link to some pictures of the HS-702 spar channels with the relief holes. Is the edge distance sufficient? The measurement is in the inch setting, so as you can see in the picture its shy of .25in or 1/4 of an in. It also seems like the actual bends on HS-710 and HS-714 don't completely match up with the bend in the doublers. So in short, everything appears to be bent at 6 degrees, just a bit off from one another.
https://www.flickr.com/gp/158887686@N05/5Q5qi6
Im diving into the front spar of my Empennage. Attached is a link to some pictures of the HS-702 spar channels with the relief holes. Is the edge distance sufficient? The measurement is in the inch setting, so as you can see in the picture its shy of .25in or 1/4 of an in. It also seems like the actual bends on HS-710 and HS-714 don't completely match up with the bend in the doublers. So in short, everything appears to be bent at 6 degrees, just a bit off from one another.
https://www.flickr.com/gp/158887686@N05/5Q5qi6