JENSWAY
Member
I have just visited a mates build and noticed that although he has an electric elevator trim, he has elected to use the manual trim configuration on the Trim Tab Horn and not the electric trim tab horn configuration as depicted on the plans.
I rushed home to try my configuration with the servo inserted and the pushrod/linkage attached to the trim tab horn (electric configuration of course).
What amount of trim tab deflection SHOULD I expect (up and down) from this configuration?
Wayne
I rushed home to try my configuration with the servo inserted and the pushrod/linkage attached to the trim tab horn (electric configuration of course).
What amount of trim tab deflection SHOULD I expect (up and down) from this configuration?
Wayne
Last edited: