DYNON Transponser 261 and ADSB 472
Approach Fast Stack made my wiring harness.
Set Transponder to Serial Port #1. (per Approach Fast Stack instructions)
Set ADSB 472 to Serial Port #3. (per Approach Fast Stack instructions)
Screen says Xponder Fail and ADS-B no radar.
Plane outside of hangar.
See 3 pics below.
I flipped the Serial Ports and the message on the screen changes to:
ADS-B In Offline
Xponder Fail
Thank you,
Approach Fast Stack made my wiring harness.
Set Transponder to Serial Port #1. (per Approach Fast Stack instructions)
Set ADSB 472 to Serial Port #3. (per Approach Fast Stack instructions)
Screen says Xponder Fail and ADS-B no radar.
Plane outside of hangar.
See 3 pics below.
I flipped the Serial Ports and the message on the screen changes to:
ADS-B In Offline
Xponder Fail
Thank you,