Hi All,
today was my third attempt to calibrate the skyview's AOA. i open the inflight setup and go to AOA. i do what Dynon tells me to do... cruise with 140 KTAS or so, pitch the aircraft several times up and down with around +-5°, stall that baby, recover, press STALL, repeat process with flaps and later push the SAVE button. but still no AOA indication. the bar stays emty with a question mark.
first possible root cause: the guys from the supplier did something wrong (never happened yet). second option: it's me.
could somebody give any hints? would be very appeciated. i also want that shiny AOA indication!
Best Regards
Kay
today was my third attempt to calibrate the skyview's AOA. i open the inflight setup and go to AOA. i do what Dynon tells me to do... cruise with 140 KTAS or so, pitch the aircraft several times up and down with around +-5°, stall that baby, recover, press STALL, repeat process with flaps and later push the SAVE button. but still no AOA indication. the bar stays emty with a question mark.
first possible root cause: the guys from the supplier did something wrong (never happened yet). second option: it's me.
could somebody give any hints? would be very appeciated. i also want that shiny AOA indication!
Best Regards
Kay