N941WR
Legacy Member
I have a Dynon D100 EFIS connected to a Dynon D10 EMS. (DSAB and serial connections) All looks great but now I'm trying to wire in my Garmin 496 and have it drive the Dynon HSI function. (No other navigation equipment is installed, such as the SL30.)
The blue wire from the GPS (Output 1) is connected to pin 19 (white w/ black wire) on the D10 EMS, per the directions. I have tested the output with a VOM and all connections are good.
The Garmin has been configured to output its data using the NMEA format.
From what I have read so far, there is no other configuration issues to deal with, yet the only options on the EMS and EFIS are for the heading bug.
What am I doing wrong here?
One other thing, software versions:
D100 EFIS: 1.06
D10 EMS: 1.06
496: Who knows, it is only a few months old.
The blue wire from the GPS (Output 1) is connected to pin 19 (white w/ black wire) on the D10 EMS, per the directions. I have tested the output with a VOM and all connections are good.
The Garmin has been configured to output its data using the NMEA format.
From what I have read so far, there is no other configuration issues to deal with, yet the only options on the EMS and EFIS are for the heading bug.
What am I doing wrong here?
One other thing, software versions:
D100 EFIS: 1.06
D10 EMS: 1.06
496: Who knows, it is only a few months old.
Last edited: