647jc
Well Known Member
While test flying yesterday I noticed the VSI indicator on my EFIS was not displaying (I also have a steam gauge VSI that I have been using). I went through the configuration pages multiple times and could not find where I could enable it. According to the manual there should be a 'VSI' option under the 'Cluttr' Menu but I swear I could not find it. I'm running the latest firmware level on a D100 with AP. The airplane is in the hangar now and before I drive back to the airport (35 miles) to play around some more I thought I would check to see if there are any secrets getting the VSI to display. I think I'm using the 'classic' display style which may be part of the problem.