Dimpling aft wing spar by flap brackets QB

[danlh]

I’m having a problem dimpling the aft spar where the flap bracket is on my QB wing. I was able to use a rivet puller on the ribs by the bracket but the holes on either side of the bracket on the spar are a double layer (rib and spar). Any suggestions?

 

[danlh]

I’m having a problem dimpling the aft spar where the flap bracket is on my QB wing. I was able to use a rivet puller on the ribs by the bracket but the holes on either side of the bracket on the spar are a double layer (rib and spar). Any suggestions?

 

[danlh]

Never mind. I found a solution.