I recently acquired an avionic pull that included a Crossbow 425EX and a Crossbow CRM500GA magnetometer. These were from the same installation, but did not include the wiring harness. I have not been able to find any documentation on interfacing the two (Tim at CheltonEFISPilots.com has no idea). Anyone flying this combination? Would you be able to provide at minimum a pinout diagram for the AHRS-magnetometer interface? Any help would be appreciated.
Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Crossbow magnetometer wiring
- Thread starter Denesius
- Start date
Mike S
Senior Curmudgeon
Welcome to VAF!
Navid, welcome to VAF.
I would check with Stein at http://www.steinair.com/?gclid=Cj0K...4CFYxBgiIYPy2KKaus-3HlAsmXzjshcZn0aAiCS8P8HAQ
Or, Walt at http://expaircraft.com/
Navid, welcome to VAF.
I would check with Stein at http://www.steinair.com/?gclid=Cj0K...4CFYxBgiIYPy2KKaus-3HlAsmXzjshcZn0aAiCS8P8HAQ
Or, Walt at http://expaircraft.com/
