Correct Engine Mount Part Numbers

[TASEsq]

I could not see this in the WIKI so thought i better ask...

My FWF kit came with Barry 94011-20 mounts.

These are a kit with the 2 mounts, and the spacer and washer.

Specifically they have parts as follows:
Mount 1 - 11900-71
Mount 2 - 11901-73
Spacer - 85-9217-02
Washer - 98-9074-11



All well and good! But none of these part numbers are listed in the plans - they only call out VIP and LORD part numbers!

Am i correct in the part number similarities that:

- VIP 50901-73 (HARD) = Barry 11901-73
-> This goes on the firewall side at the top, and the engine side at the bottom.
- VIP 50900-71 (SOFT) = Barry 11900-71
-> This goes on the engine side at the top, and the firewall side at the bottom

- VIP 50271-02 (Spacer tube) = Barry 85-9217-02
- VIP 50074-11 (Washer) = Barry 98=9074-11
-> This goes on the firewall side under the bolt head at the top, and on the engine side at the bototm between the engine at the mount (aka on the face of the HARD mount)


The part numbers are all eerily similar so i am guessing they are right - but thought i would check.

 

[stigaro]

Saw this last week and was wondering the same thing. I assumed the same thing, but will await a definitive reply. Thanks for asking the question.

 

[lipper03]

I matched the last numbers like you are thinking, I assume that's correct, but I didn't ask. Engine went on fine, and all seemed correct, torque was good as well.

EAABuildersLog.org - Free aircraft builders log website.

EAABuildersLog.org is a airplane builders log website to store your projects on the web for free. The EAA (Experimental Aircraft Association, Inc.) provides this website for it's members for free..

eaabuilderslog.org

 

[TASEsq]

So I finally got the 4 sets of mounts of of their boxes and found across the 4 boxes, I received:
5 x 11900-71
3 x 11901-73

I.e. one box had 2 x 11900-71 in the box.

Obviously I am unable to hang my engine without the additional -73.

Doh.