DennisRhodes
Well Known Member
Anyone have a source for replacement of a COM 5-3 bearing( bushing)?. This is the pivot bearing in both inboard and outboard aileron on at least an RV9 maybe 7 and or 8 .
And possible repair method for installing. Looks like you can drill out the two rivets , separate the two sandwich halfs of P/N 914, insert a new bearing and re- rivet. Would certainly like to do this without removing the 914 bracket from rear spar. Comments appreciated.
And possible repair method for installing. Looks like you can drill out the two rivets , separate the two sandwich halfs of P/N 914, insert a new bearing and re- rivet. Would certainly like to do this without removing the 914 bracket from rear spar. Comments appreciated.