Today I finished installing a new Catto prop. Compared to the metal Sensenich, it is so smooooth. It doesn't seem to be quite as fast. At 6,000' my 0-320 turned 2800 rpm, with an indicated A/S of 188mph.
The problem is that the front bulkhead does not allow the spinner to fully reach the rear bulkhead. It is 1/8" short. I used a dremmel(sp) to lightly smooth the inside of the spinner, as much as I dare.
Suggestions???
Bill Newkirk
N283RV
The problem is that the front bulkhead does not allow the spinner to fully reach the rear bulkhead. It is 1/8" short. I used a dremmel(sp) to lightly smooth the inside of the spinner, as much as I dare.
Suggestions???
Bill Newkirk
N283RV