Michael Burbidge
Well Known Member
The plans show the brake line going down the aft side of the gear. But the brake line fitting exits the fuselage in front of the gear. I assume that it is not a problem running the brake line down the front of the gear. It would require some very tight bends at the top to run down the aft side of the gear.
I was just a little worried about the fairing clamp at the top of the gear since the fairing is thinner aft of the gear than in front.
Michael-
I was just a little worried about the fairing clamp at the top of the gear since the fairing is thinner aft of the gear than in front.
Michael-