Bonaco can make you -3 lines with -4 nuts.
QUOTE=flyvans.com;160939]hi all,
we'll also go with the braided hose, along the main gear legs to the brake assembly and from the master cylinder to the parking brake valve, which is at the position of the standard van's brake line bracket on the firewall.
we're building a 7A.
all the fittings on the matco parking brake valve (could be exchanged if needed) and the bulkhead fittings in the gear leg weldments (would be a pita to exchange) are already installed, AN4, as per plans for the aluminum lines.
questions:
- will a -3 braided hose line (as from the mentioned kit) fit the AN4 fittings, or is -4 required?
- if not, what options do we have?
- the 2 x 24", am i right in assuming, these are to replace the 2 lines that come from van's for the brake master cylinder to firewall?
- the 2 x 36", are these the main gear leg lines, and if so, will they work for a 7A?
thank you very much!
kind regards, bernie[/QUOTE]