krazydoc33
Member
I have about 55 hours on my -12 and due to moving and a medical problem had not used it for about 4 months. It was not happy on starting but did get there after about 10 minutes of trying. I taxied to the runup area, about 3,000' and as I braked to a stop the engine died. It would not restart and I towed it back to the hangar. Checked the fuel flow all the way to each carb and it is fine but both ignitions are dead, no spark on either side. I do not see anything in the schematic or the wiring diagram for a single point of failure. The engine was supplied in 2012 and does have the soft start. So far I have not found the cause of the failure. Nice that it died at the beginning of the runway and NOT at the far end.