Jamie
Well Known Member
Guys/Gals:
I'm piecing together my forward fuselage now. I've found it necessary to put slight bends in the forward side skin stiffeners and the aux longerons to get them to lay down against the skin. The plans mention putting a 'twist' in there but nothing about bending them. Did any other slow-builder's out there notice this? Also, could anyone with a quickbuild kit look at those angles and confirm if they're bent ever so slightly?
Thanks,
I'm piecing together my forward fuselage now. I've found it necessary to put slight bends in the forward side skin stiffeners and the aux longerons to get them to lay down against the skin. The plans mention putting a 'twist' in there but nothing about bending them. Did any other slow-builder's out there notice this? Also, could anyone with a quickbuild kit look at those angles and confirm if they're bent ever so slightly?
Thanks,