David_Nelson
Well Known Member
Hi All,
I'm fitting/trimming the baffle material so that I can get the baffles squared away..mostly. Anyways, I can't figure out how to trim and place the baffle material on an outside corner so that it seals against the cowling. This is the outside corner that I'm talking about:
I know there's supposed to some sheet-metal here that would make this easy but I'm going a different route by adding a support strut and mounting the oil cooler as high as reasonably possible.
Thanks!
I'm fitting/trimming the baffle material so that I can get the baffles squared away..mostly. Anyways, I can't figure out how to trim and place the baffle material on an outside corner so that it seals against the cowling. This is the outside corner that I'm talking about:
I know there's supposed to some sheet-metal here that would make this easy but I'm going a different route by adding a support strut and mounting the oil cooler as high as reasonably possible.
Thanks!
Last edited: