UnPossible
Well Known Member
Hey - I am working on the ever-so-fun baffles and am running into some issues with figuring out when to stop working on the left front baffle and shift towards the horizontal induction snorkel installation.
What I am struggling with is do I bend up the left front ramp to match with the cowling before I fit the snorkel?
One of the first instructions for the snorkel is to measure down 3/8" from the left front ramp and draw a line that you trim the snorkel to. If I bend this ramp to match up with the cowel inlet, the cut on the snorkel will not be straight. I also am struggling a bit with seeing how the filter will lay flat on top of the bent ramp.... it may be the correct way to go, but wanted to check with those that have gone before me before I screw up yet another part.
Thanks,
Jason
What I am struggling with is do I bend up the left front ramp to match with the cowling before I fit the snorkel?
One of the first instructions for the snorkel is to measure down 3/8" from the left front ramp and draw a line that you trim the snorkel to. If I bend this ramp to match up with the cowel inlet, the cut on the snorkel will not be straight. I also am struggling a bit with seeing how the filter will lay flat on top of the bent ramp.... it may be the correct way to go, but wanted to check with those that have gone before me before I screw up yet another part.
Thanks,
Jason